If you can keep a freshwater tank stable, you can keep a marine one. The biology is the same idea; there’s just less room for error, and the mistakes cost more. Here’s what changes.
What’s actually different
| Freshwater | Marine | |
|---|---|---|
| Water | Dechlorinated tap | RO/DI water mixed with marine salt |
| Salinity | None | Specific gravity about 1.024 to 1.026, measured with a refractometer |
| Temperature | 24 to 27°C for most tropicals | 25 to 26°C, kept steady |
| Filtration | Sponge or canister | Live rock plus a protein skimmer, usually in a sump |
| Top-up | Tap water | Fresh RO water only; salt doesn’t evaporate |
| Cycling | Four to six weeks | Similar, but go slower before adding fish |
Fish-only or reef?
Start fish-only with live rock (often called FOWLR) if you want lower cost and fewer things to test. A reef with corals needs good lighting and steady alkalinity, calcium and magnesium (roughly 7 to 9 dKH, 420 ppm and 1,300 ppm). Soft corals are a forgiving first step.
Good first marine fish
- Captive-bred clownfish (hardy, and they don’t need an anemone)
- Royal gramma
- Firefish goby
- Yellow watchman goby, ideally with a pistol shrimp
- Banggai cardinalfish (captive-bred)
Graham’s warning: blue tangs and other surgeonfish look great in films but need very large tanks. Don’t buy one for a starter system.
Your first steps
- Buy a refractometer and an RO/DI unit (or a reliable source of RO water).
- Choose a tank of at least 100 litres; bigger is more stable.
- Add rock and sand, mix saltwater to target salinity, cycle.
- Add a clean-up crew (snails, small hermit crabs) before fish.
- Add one or two fish, wait, test, repeat.
Freshwater skills that carry straight over: patience, testing, quarantine and not overstocking. Follow the Marine section as we build out more guides.