The short answer: Fin rot is a bacterial infection that eats fins from the edges inwards. It’s nearly always caused by poor water or stress, so fixing the water is most of the cure. Caught early, fins grow back.
First, test your water. Ammonia, nitrite, nitrate, pH and temperature. Poor water causes or worsens most fish illness, and medicine in a poisoned tank makes things worse.
Signs to look for
- Ragged, frayed or split fin edges
- Milky white or red edges on the fins
- Fins getting shorter over days
- In bad cases, red streaks at the fin base or the infection reaching the body
What causes it
- Ammonia, nitrite or high nitrate (the most common cause)
- Fin nipping by tank mates, then infection
- Overcrowding and stress
How to treat it
- Test the water. Do a 30 to 50% water change and keep doing smaller ones until ammonia and nitrite read zero and nitrate is under 20 ppm.
- Find and stop any fin nipping. Move the bully or the victim if needed.
- If clean water alone hasn’t stopped it in 3 to 4 days, use an anti-bacterial fin rot treatment for the whole tank, following the label.
- If the infection reaches the body, or the fish stops eating, ask a fish vet or a good local fish shop about stronger treatment.
Be careful: Long-finned fish (bettas, fancy guppies) get it most. Don’t mistake normal fin damage (a clean split) for rot: rot has a white or red, eaten-away edge.
Stop it coming back
- Weekly water changes
- Don’t overstock
- Don’t keep long-finned fish with nippers like tiger barbs and serpae tetras
Medicines: always follow the label, remove carbon from the filter while treating, and don’t mix treatments unless the label says it’s safe. I don’t recommend specific brands here; your local fish shop can show you what’s licensed for this in the UK. If several fish are dying or nothing works, a vet who treats fish can help.
More in the clinic: Fish Health Clinic: all diseases · The nitrogen cycle · Start here
Not sure what your fish has? Describe the signs in the comments, with your test results, and I’ll help. — Graham
Get in touch I’d love to hear from you